Optional Rail Kit for Kayak/Canoe Totes
$28.95
(Order Now)

Attaches to Canoe/Kayak Tote to provide elevated hull support, up to 7.5cm (3"), for deep keeled kayaks and canoes that may have trouble sitting correctly on cart's regular cross bars. Greatly enhances stability and prevents damage. Fits all 1999 and later model totes. 1998 and older models may be modified to accept Rail Kit.

Optional Seat for Canoe/Kayak Totes
$9.95
(Order Now)
Coated nylon with Velcro® closure. Quickly converts cart or tote into comfortable campstool.

These totes can really save your back from straining

Facilitates loading your boat onto the roof racks of your car or van. Simply use the tie-down straps to mount the tote upside-down onto the trunk of the car or the upper edge of the van rear. Now place on end of the boat between the tote wheels. Grab the other end of the boat and slide it up. The wheels will guide and carry the boat while rolling it.

CLICK HERE TO WATCH SHORT A VIDEO OF THE TOTE IN ACTION

Canoe/Kayak Tote Features:

• Heavy duty aluminum frame, completely marine grade anodized
• Sturdy double legged kick stand for easy one person loading
• Large detachable wheels with balloon tires
• Collapsible for easy in-boat storage
• Includes two 4m (13') tie-down straps
• Optional seat cover converts it to a camp stool

Tote Specifications: (For assembled tote)

• Tote Weight: 4.5kg (10 lbs)
• Crossbar to ground: 38cm (15")
• Width at axle: 90cm (35.5")
• Frame size folded, less wheels: 90x35x10cm (35.5x13.5x4")
• Anodized, heavy duty aluminum frame
• Maximum tote capacity: 80kg (176lbs)
• Roleez Balloon Wheels: 30x18cm (11.8x7")
• Inflate tire to maximum 0.27 Bar (4 psi)
• Use low pressure gauge for proper tire inflation
• Keep all parts freshwater rinsed and dry for storage and transport

  IMPORTANT: ROLL AT WALKING SPEED ONLY!
  DO NOT TOW WITH MOTORIZED VEHICLES!

Loading Technique:

• Assemble tote, extend kick-stand
• Place boat on tote with mid point of hull slightly aft of cross bar
• Strap boat to tote as pictured: one strap per cross bar
• Remember to retract kick-stand before rolling

Parts List:

1. Pre-assembled, anodized aluminum frame unit
2. Wheel assemblies
3. Quick clip pins